| WHITE FILTER INC. | |
| TEXAS OLDEST COMPLETE FILTER SALES & SERVICE |
|
|
| P.O. Box 940034 | Plano, Texas 75094 | ||
| 214.340.2337 Office | sales@whitefilter.com | ||
| 972.398.0696 Fax | www.whitefilter.com | ||
| Home | Pleated Filters | Bag Filters | Auto Rolls | Panel Links | Poly Cubes | Paint Booth | Odor Control | Frames & Media | Grease Filters | Services | Feed back |
| Odor Ban Pleated
Carbon Air Filter "Odor Ban" filters are specifically designed for the removal of fumes, odors, pollutants and dust particles. Remove odors from cooking, new paint, new carpet, bathroom smells, cigarette and cigar smoke, pet odors, etc. For a complete listing of odors, gases and fumes removed by activated carbon please see chart below. Simply install the filter as you would any standard air filter. The filter media is an activated carbon impregnated, non-woven polyester that is pleated and enclosed in a 24-point heavy duty, high wet strength beverage board frame. The pleated design increases the surface area of carbon exposed to the air flow which traps noxious gases and odors. Each filter contains approximately 10.44 grams of carbon per square foot, i.e. a 24x24x2 filter would contain approximately 125 grams of carbon. |
 |
 |
|
||||||||||||||
| Guide for Vapors, Gases and Fumes removed by Activated Carbon. | ||
| The numbers given represent typical or average conditions and might vary in specific instances. The values in the table have been assembled from many sources including laboratory tests and field experience. | ||
| The capacity index has the following meaning: | ||
| 4.
High capacity for all materials in this category. One pound takes up about 20% to 50% of
its own weight average about 1/3 (33 1/3%). This category includes most of the odor
causing substances. |
||
| 3.
Satisfactory capacity for all items in this category. These constitute good applications
but the capacity is not as high as for category 4. Absorbs about 10% to 25% of its
weight-average about 1/6 (16.7%). |
||
| 2.
Includes substances which are not highly adsorbed but which might be taken up sufficiently
to give good service under the particular conditions of operation. These require
individual checking. |
||
| 1. Adsorption capacity is low for these materials. Activated carbon cannot be satisfactorily used to remove them under ordinary circumstances. | ||
| * Straight activated carbon does not have much capacity for some reactive gases, such as ammonia, formaldehyde, etc. In some cases where the gas is chemically reactive, appropriate impregnated activated carbon can be recommended. Those odorants marked below with an asterisk fall into this category. |
|
Pricing available on request.
For requests, visit our Feedback page.
Send mail to Sales@whitefilter.com
with questions or comments about this web site.